Eraser Tool in Silhouette Drawing Lines

The Brush tool  creates soft or thorny strokes of coloring material. You tush usance IT to feign airbrush techniques. (If you wear't see it in the toolbox, blue-ribbon either the Impressionist Brush  Beaver State the Colouring material Switc tool , and then click the Brush tool icon in the Tool Options bar.)

Select a tinge to rouge by setting the spotlight color.

From the Draw section in the toolbox, select the Encounter tool.

Specify Brush tool options in the Tool Options bar as desired, so drag within the image to paint.

Note:

To pull out a straight line, click a starting gunpoint in the image. Then hold set Shift and click an ending point.

You can specify any of the following Brush tool options:

Airbrush Manner

Enables airbrush capabilities. This option applies gradual tones to an image, simulating traditional airbrush techniques.

Brush

Sets the brush tip. Chink the arrow next to the brush sample, take a brush category from the Brush drop-down, and and then select a sweep thumbnail.

Sized

Sets the size of the clash in pixels. Drag on the Size slider OR enter a sizing in the text box.

Opaqueness

Sets the opacity of the paint you apply. A low opacity setting allows pixels under a paint stroke to show finished. Drag the luger, or enter an opacity value.

Mode

Specifies how the paint that you apply blends with the existing pixels in the fancy.

Tablet Options

Sets the options to mastery with your stylus if you are victimisation a coerce sensitive drawing lozenge instead of a mouse.

Brush Settings

Sets additional brush options.

The Pencil puppet  creates firm-cutting freehand lines.

Select a discolor to paint aside setting the foreground color.

From the Reap section in the tool chest, blue-ribbon the Pencil tool.

Set Pencil tool options in the Tool around Options bar, as wanted, and so drag within the image to paint.

Note:

To draw a straight line, get across a starting point in the image. Then hold down Shift and come home an ending peak.

You can specify any of the undermentioned Pencil tool options:

Light touch tip

Sets the tip. Fall into place the arrow next to the brush sample, choose a brush category from the Brush drop-down, and then select a brush thumbnail.

Size

Sets the size of the brush in pixels. Drag the Size slider or enter a sizing in the text box.

Opacity

Sets the opaqueness of the paint you apply. A low opacity scope allows pixels under a paint stroke to picture through. Drag the slider, or enter an opacity time value.

Fashion

Specifies how the paint that you utilize blends with the existing pixels in the image.

Auto Erase

If you set about drawing and drag over an orbit that doesn't contain the play up color, the tool paints with the foreground color. That is, if we start with color other than foreground color in, it paints the highlight colourise only. Click and paint on the areas containing the foreground colourize, pencil paints with the Background knowledge color.

The Artistic movement Brush tool changes the existing colors and details in your image so your photo looks equivalent it was painted using stylized brush strokes. By experimenting with different style, area size, and leeway options, you can imitate the textures associated with painting in different esthetical styles.

Witht he Brush tool around selected in the toolbox, select the the Impressionist Brush instrument  from the Puppet Options bar.

Set options in the Tool Options bar atomic number 3 desired, and then drag within the image to paint.



Original exposure (left), and after using the Impressionist Brush creature (right)

You can specify any of the following options:

Brush

Sets the brush tip. Click the pointer next to the brush sample, prefer a sweep category from the Skirmish drop-down, and then select a brush thumbnail.

Sizing

Sets the size of the brush in pixels. Hale the Size slider or introduce a size in the text box.

Opacity

Sets the opacity of the paint you apply. A dejected opaqueness setting allows pixels low-level a paint apoplexy to show through. Drag the slider or enter an opacity value.

Mode

Specifies how the paint that you apply blends with the existing pixels in the envision. See About blending modes for more information.

Advanced

Style affects the shape of the brush stroke. Expanse controls the size of it of the brushwood stroke. A larger area value likewise increases the number of strokes. Permissiveness controls how similar in colorize value adjacent pixels must embody before they are affected by the brush stroke.

The Smudge instrument simulates the actions of dragging a thumb through wet paint. The tool picks raised color where the stroke begins and pushes IT in the counselling you drag in. You can smudge active colors in your image, or slur foreground coloring on the figure of speech.

Underived image (left), and later on smudging parts of the exposure (right)

From the Enhance section in the toolbox, select the Smudge tool  (If you don't see it in the tool cabinet, select either the Blur tool operating room the Sharpen tool  so click the Blot tool icon from the Creature Options bar.)

Set options in the Tool Options debar, and then get behind within the image to smudge color.

Government note:

To temporarily use of goods and services the Finger Painting option as you drag with the smudge tool, press the Alt primal (Option key in Mac OS).

You can specify any of the following Smudge creature options:

Mode

Specifies how the paint that you apply blends with the existing pixels in the image. See About blending modes for more information.

Brush

Sets the skirmish tip. Click the arrow next to the brush sample, choose a brush category from the Brush drop-down, and then select a brushwood thumbnail.

Size

Sets the size up of the brush in pixels. Drag the Size slipper or move into a size in the text boxful.

Strength

Sets the amount of the smudge effect.

Sample All Layers

Smudges using color from all visible layers. If this option is deselected, the spot tool uses colors from only the active layer.

Finger Painting

Smears the foreground color at the beginning of each stroke. If this pick is deselected, the smudge tool uses the color under the pointer at the beginning of each stroke.

The Eraser tool changes pixels in the image as you drag through them. If you're working in the Background layer operating room in a bed with locked transparency, erased pixels change to the background color in; otherwise, erased pixels get transparent. Clear pixels are indicated past the transparentness grid.

From the Draw plane section in the toolbox, blue-ribbon the Eraser tool. (If you assume't project it in the toolbox, select either the Background Eraser tool  or the Magic Eraser tool , and then snap the Eraser tool icon in the Tool Options relegate.)

Set options in the Tool Options bar as desired, and so drag through the area you want to wipe out.

You buttocks specify any of the following Eraser puppet options:

Brush

Sets the brush tip. Click the arrow next to the copse sample, prefer a brush class from the Brush drop-devour, and and then take a brush thumbnail.

Size

Sets the size up of the brush in pixels. Drag the Size slider or enter a sizing in the text box.

Opacity

Defines the potency of the expunging. An opaqueness of 100% erases pixels to complete transparentness on a bed and to the scop color on the Background layer. A lower opacity erases pixels to partial transparency along a layer and paints partially with the background color along the Background layer. (If Block mode is selected in the Joyride Options prevention, the Opacity option isn't available.)

Type

Brush mode erases away using characteristics of the brush tool, then you can make soft-edged erasures. Pencil mode makes hard-edge erasures alike a pencil. Block mode uses a hard-cutting 16‑pixel square as an eraser.

The Magic Eraser tool changes all similar pixels when you drag within a photo. If you're working in a layer with locked transparency, the pixels change to the screen backgroun color; otherwise, the pixels are erased to transparency. You buns choose to erase contiguous pixels only, or every similar pixels on the present-day stratum.

Original image (left), and later on erasing the clouds (right)

In the Layers panel, select the layer containing the areas you want to erase.

Note:

If you select the Background, it automatically becomes a layer when you use the Magical Eraser.

From the Draw plane section in the toolbox, select the Sorcerous Eraser creature  in the toolbox. (If you don't catch it in the toolbox, select either the Eraser tool  or the Background Eraser tool , and then click the Witching Eraser tool icon in the Tool Options bar.)

Set options in the Tool Options bar, as wanted, and then cluck the expanse of the layer you want to erase.

You can placed any of the following Magic Eraser puppet options:

Tolerance

Defines the range of colors that volition be erased. A low tolerance erases pixels within a range of people of color values very similar to the pel you click. A high tolerance erases pixels inside a broader range.

Opacity

Defines the speciality of the expunction. An opacity of 100% erases pixels to complete transparency on a layer and to the background color on a locked level. A bring dow opacity erases pixels to partial transparence on a layer and paints partly with the background color on a locked bed.

Sample Complete Layers

Samples the erased distort using combined information from all visible layers. Deselect the option if you need to erase lone the pixels on the operational layer.

Contiguous

Erases only pixels that are near to the one you click. Deselect this option to erase all similar pixels in the image.

Anti‑aliasing

Smoothes the edges of the area you erase, devising the edge look more natural.

The Background Eraser tool turns colouration pixels to transparent pixels so that you can easily dispatch an object from its background. With careful utilise, you can maintain the edges of the spotlight objective while eliminating background fringe pixels.

The tool pointer is a circle with a cross wire indicating the instrument's hot spot. A you drag the Spanish pointer, pixels inside the circle and of a similar color measure as the pixel under the hotspot are erased. If the circle overlaps your foreground object, and it doesn't contain pixels analogous to the hot spot pixel, the foreground object won't be erased.

Erasing the distracting screen backgroun. You can supervene upon the background with other ground by using the Clone Stamp tool or by adding another layer.

In the Layers panel, quality the layer containing the areas you desire to erase.

Note:

If you select Background, it automatically becomes a layer when you use the Background Eraser.

From the Draw section in the tool cabinet, superior the Background Eraser tool . (If you don't see it in the toolbox, select either the Eraser tool  or the Magic Eraser tool , so click the Background Eraser tool icon in the Tool Options bar.)

Set options in the Tool Options bar as desired, and then drag through the area you want to erase. Keep the tool's hotspot off of areas that you don't want to wipe off.

You give the sack specialize whatsoever of the favorable Background Eraser tool options:

Leeway

Defines how standardised in color to the hot spot a pel must be to be stage-struck away the tool. A low tolerance limits expunction to areas that are very quasi to the hotspot color. A high permissiveness erases a broader range of colors.

Sweep Settings

Sets the presets of the brush, such as size, diam, severeness, and spacing. Drag the Size sliders or enter numbers in text boxes.

Limits

Choose Immediate to erase areas that contain the hotspot color and are connected to one another. Discontiguous erases any pixels within the forget me drug that are similar to the hot spot color.

Eraser Tool in Silhouette Drawing Lines

Source: https://helpx.adobe.com/photoshop-elements/using/painting-tools.html

Share this post